YCHGL series load isolation switches (hereinafter referred to as switches)are suitable forAC 50Hz,rated voltage 660V,and rated current up to 3200A.They are used for infrequentconnection and disconnection of circuits and electrical isolaion.This product adopts a mod-ular design structure and has flexible and diverse combinations.Switches are widely usedin distribution systems and automation systems in construction,power,petroleum,chemical,and other industries.

Standard:IEC60947-3

General
YCB7RL-100 series electromagnetic residual current operated circuit breaker (RCCB)  is mainlysuitable for AC distribution networks with a rated working voltage of 230V or 400V at 50Hzand a rated current of 63A.Used for indirect contact protection of people,and can also beused to prevent fire hazards caused by insulation damage to circuits and equipment,resulting in ground fault currents.

AC 50Hz, rated voltage 660V, rated current 3200A. It is used for making and breaking circuit not frequently.

Standard: IEC60947-3

YCM3 Series moulded case circuit breaker,is new products,with small compact, modular,high break,double breakpoints,zero arcing,green environmental protection.

Suitable for AC 50Hz,60Hz,rated operating voltage 690V and below, rated current 125A to 1600A distribution network,used to distribute electrical energy and protection lines and power supply equipment from overload,short circuit and undervoltage failure hazards.

It can also be used as a non-frequent conversion of the line under normal conditions and in the infrequent start of the motor.

General
1.Protection againstoverload and short-circuit currents
2.Protection against the effectsof sinusoidal alternating earth fault currents
3.Protection against indirect contacts and additional protection against directcontacts.
4.Protection against fire hazard causedbyinsulation faults
5.Usedin residentialbuilding
6.According tothe type of instantaneousrelease classified as follows:type B(3-5)In,type C(5-10)In

General

YCTYE Concumer Box

GSD series circuit breaker is for overload &short circuit protection with isolation function ,which is used in residential and industrial distribution system. Fault indication function
Heat-resistant and thermoset cases ,increased stability and structural rigidity; Poles:1P,2P,3P
Rated Current:10A,15A,20A,25A,30A,35A,40A,50A,60A Rated Voltage:AC120/240V Standard:IEC 60947-2

YCH9s-125 series isolating switch is suitable in the resistive circuit of Ac 50/60HZ, rated voltage 230/400V, rated current up to 125A. It’s used primarily for circuit’s turning on or off in non-load ed situation, And it functions on connection and isolation between lines and power, especially suitable to isolate power effectively and prevent circuit breaker from closing accidentally when maintain the circuit in order to ensure the safe operation of maintainer.

Product standard:IEC600947-3

General
YCQ9E series automatic transfer switch, rated working curent 16A to 630A,to be used in pow- er systems for ensuring the continuity of the supply, by transfering a load between two power supply sources. The switch has three working posions of “Main ( I ) cosing”, “Standby ( II )
closing” and “Double-of (0)”, which can be used for fire-fighting linkage and infrequent con-
necion and disconnecion of power supply systems. Mainly used in hospitals, shopping malls, banks, chemical industy, metalurgy, high-rise buildings, military facilities and fire-fighting occa- sions where power failure is not allowed.
Standards: IEC 60947-6-1

General
CJ19i contactor for capacitor switching (hereinafter called contactor)is suitable forthe circuitofAC 50Hz/60Hz with rated rated voltage up to 690V.It is mainly used toadd low voltage reactive power compensation equipment or cut off low voltageparalel capacitor.The contactor is equipped with a device to suppress the inrushcurrent,which can effectively reduce the impact ofthe making inrush current on thecapacitor andsuppress the over-voltage when thecapacitor is cut off.Standard:IEC/EN 60947-4-1.