Working Conditions 1. Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off, normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power controller, it must install speediness discharge power equipment. it would not limited which use adopting same electric factor input and chip switch. 2. Altitude level is not more than 200...

General The Changeover Switch can switch on,Load and break the circuit under normal conditions,using as Switch Disconnectors. Standard: IEC 60947-3 Specifications Circuit Diagram Overall and Mounting Dimensions(mm)

General 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. Curve Specifications Overall and Mounting Dimensions(mm)

Basic Function 1. LCD display,button for LCD display step by step 2. Bi-directional total active energy, reverse active energy measure in the total active energy 3. The meter also display real voltage, current, active power, reactive power,power factor,frequency 4. Timing and delay control by APP 5. History active energy consumption tracking by APP 6. Check the real current,voltage active power by APP 7. Remote control on/off by APP 8. WIFI communication, can read and remote control by mobile...

Scope EP mainly used for electrical equipment cabinets or three-phase asynchronous motor load start shifting and steering, used as the main and auxiliary circuits conversion, can fully replace other switch. Type Designation Main Technical Parameters Dimensions and Mounting Dimensions Dimensions and Mounting Dimensions

Product Structure General CJ19i contactor for capacitor switching (hereinafter called contactor) is suitable for the circuit of AC 50Hz/60Hz with rated rated voltage up to 690V. It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacitor. The contactor is equipped with a device to suppress the inrush current, which can effectively reduce the impact of the making inrush current on the capacitor and suppress the over-voltage when the...