General Grounded socket TMS-5 is suitable for single-phase power supply, used in the auxiliary AC circuit for connecting electrical appliances (portable lamps, power supply, etc.). Standard: IEC 60884-1. Technical Features Overall and Mounting Dimensions The socket must be installed and connected by professional electrical personnel. The socket is mounted on DIN 35mm guide rail, the tightening torque is 2.5 N.m. Wiring Diagram General

General 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. Curve Specifications Overall and Mounting Dimensions(mm)

COB-61 COB-61A COB-64 COB-64A Applicable Scope COB series is suitable for using in the circuit that frequency 50/60Hz, rated voltage up to AC380V or DC250V. It is mainly used outdoor, and could be used in snowy, dusty environment, for the remote controlling of the crane, hoist and other equipments. Working And Mounting Condition 1. Ambient temperature: -5?~+40?, average temperature≤+35? in 24h 2. Altitude≤2000m 3. Air condition: when temperature up to 40?, the humidity should be ≤ 50%, te...

General CJX2 series AC Contactor is suitable for using in the circuits of rated voltage up to 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The Contactor is produced...

Working Conditions 1. Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off, normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power controller, it must install speediness discharge power equipment. it would not limited which use adopting same electric factor input and chip switch. 2. Altitude level is not more than 200...

General 1. Protection against the effects of sinusoidal alternating earth fault currents 2. Protection against indirect contacts and additional protection against direct contacts 3. Protection against fire hazard caused by insulation faults 4. Controlling and Switching 5. Used in residential building, non-residential building, energy sources, industry and infrastructure Release Wiring Diagram Specifications Overall And Mounting Dimensions(mm)