• pro_banner

YCS6-D Surge Protection Device

Short Description:

General
YCS6-D series Surge Protection Device is suitable for TT, IT, TN-S, TN-C and TN-C-S, the power supply system with the rated voltage up to 230/400V and AC 50/60Hz. Its design corresponds to IEC61643-1. The product is usually installed in the incoming line low voltage distribution box of the building, and it can release 20kA lightning stroke current.
The lightning current SPD protection with protection level: III is applied to the Equipotential bonding when the lightning strike. YCS6-D Device should be installed in the boundary of LPZ1, LPZ2 and LPZn, usually in front of the residential distribution box, computer center, informational equipment, electronic equipment and controlling equipment or in the nearest socket box.


Product Detail

Product Tags

product-description1


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • YC9VA-3 Voltage Protection Relay

      YC9VA-3 Voltage Protection Relay

      Description YC9VA voltage and current display relay is a microprocessor-based voltage monitoring device for single-phase AC networks to protect electrical equipment from surge voltage. The device analyzes the main voltage and displays its current value on a digital indicator. Load is switched by electromagnetic relay. The user can set the current voltage value and delay time through the button. The value is stored in non-volatile...

    • YCB7-125 MCB

      YCB7-125 MCB

    • YCX6 Lighting Distribution Box

      YCX6 Lighting Distribution Box

    • YCBZ-40 Change-over Switch

      YCBZ-40 Change-over Switch

      General The Changeover Switch can switch on,Load and break the circuit under normal conditions,using as Switch Disconnectors. Standard: IEC 60947-3 Specifications Circuit Diagram Overall and Mounting Dimensions(mm)

    • YCB9N-40 MCB DPN

      YCB9N-40 MCB DPN

      General 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. 5. According to the type of instantaneous release classified as follows: type B(3-5)ln, type C(5-10)ln Release Curve ...

    • YCH6Z-125 Isolating Switch

      YCH6Z-125 Isolating Switch

      Normal Operating Conditions 1. Ambient Temperature: -25℃~+60℃ 2. Altitude: Not higher than 2000m 3. Use Category: AC-22A 4. Installation Method: Embedded vertical standard rail mounting 5. Wiring Method: Clamp connection wire with screw, tightening torque 2.5N.m