• pro_banner

YCQ1B Automatic Transfer Switch

Short Description:

Product Overview

The dual power automatic switch is used to switch between two power sources. It is divided into common power supply and standby power supply. When the common power supply is powered off, the standby power supply is used. When the common power supply is called, the common power supply is restored), if you do not need automatic switching in special circumstances, you can also set it to manual switching (this type of manual / automatic dual-use, arbitrary adjustment).


Product Detail

Product Tags

product-description1 product-description2


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • YCQ6B Automatic Transfer Switch

      YCQ6B Automatic Transfer Switch

      Operating Conditions 1. Ambient air temperature Limit of temperature: -5℃~+40℃. The average no more than +35℃ within 24 hours. 2. Transportation and storage Limit of temperature: -25℃~+60℃, The temperature can be up to +70℃ within 24 hours. 3. Altitude ≤ 2000m 4. Atmospheric condition When the temperature is +40℃, the air relative humidity should not exceed 50%, only under lower temperature can allow for higher relative humidity. If the temperature is 20℃, the air r...

    • YCQ9M Automatic Transfer Switch

      YCQ9M Automatic Transfer Switch

      Product Overview 1. Ensure un-interruptible service of critical electric power When overvoltage, under-voltage or phase failure occur to a power supply, it will automatically switch over to another power supply or start the electric generator. It is mainly used in hospital, shopping mall, bank, hotel, high buildings and fire control where long time power disconnection is not allowed and ceaseless power supply is needed. 2. Full automatic power supply changeover syst...

    • YCQ2 Automatic Transfer Switch

      YCQ2 Automatic Transfer Switch

      Structure and Features YCQ2 Series intelligent dual power automatic switches is made up of two units in 3 pole and 4 pole of MCCB and(auxiliary contacl, alarm contact),the mechanical interlocking transmission, intelligent controller and other components. It has the integral style and split type with two kinds mechanism. Integral controller is equipped with a base and executing agencies ; Split type is intelligent controller install ed in the panem User take the base...

    • YCHGLZ1-125~3150A Changeover Switch

      YCHGLZ1-125~3150A Changeover Switch

    • YCQ4E/YCQ4R PC type Automatic Transfer Switch

      YCQ4E/YCQ4R PC type Automatic Transfer Switch

      General IEC60647-6(1999)/GBI14048.11-2002 “low voltage switchgear and control equipment multifunctional no.1:automatic transfer switches” Control device:built in controller Product structure:no power off,guide rail type,high current,small volume,two-stage type, simple structure,ATS integration Features:fast switching speed,low failure rate,convenient maintenance and reliable perfomance Wiring mode:front plate wiring Conversion mode:power grid to power grid,power gri...

    • YCQ3B Automatic Transfer Switch

      YCQ3B Automatic Transfer Switch