Solutions
Support
News
About Us
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
YCH6Z-125 Isolating Switch
Picture
YCH6Z-125 Isolating Switch
1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
Conatct Us
Product Details
Normal Operating Conditions
1. Ambient Temperature: -25℃~+60℃
2. Altitude: Not higher than 2000m
3. Use Category: AC-22A
4. Installation Method: Embedded vertical standard rail mounting
5. Wiring Method: Clamp connection wire with screw, tightening torque
| Type | Standard | IEC/EN 60947-3 | |
| Electrical features | Poles | P | 1, 2, 3, 4 |
| Rated voltage Ue | V | 230/400 | |
| Rated current le | A | 20,32,40,63, 80,100,125 | |
| Rated frequency | Hz | 50/60 | |
| Rated impulse withstand voltage(1.2/50)Uimp | V | 4000 | |
| Rated short-time withstand current lcw | 12Ie, 1s | ||
| Rated making and breaking capacity | 3Ie, 1.05Ue, cosΦ=0.65 | ||
| Rated short circuit making capacity | 20Ie, t=0.1s | ||
| Dielectric test voltage at ind.Freq.for 1min | kV | 2.5 | |
| Insulation voltage Ui | V | 500 | |
| Pollution degree | 2 | ||
| Mechanical features | Electrical life | t | 1500 |
| Mechanical life | t | 8500 | |
| Protection degree | IP20 | ||
| Ambient temperature(with daily average≤35℃) | ℃ | -5~+40 | |
| Installation | Terminal size top/bottom for cable and pin-type busbar | mm² | 50 |
| AWG | 18-1/0 |
Write your message here and send it to us
Data Download
Related Products
-
YCB9-63 MCBlype lest current Tripping time Expected result Type Test current Tripping time Expected resut B,C,D 1.13In t≤1h(In≤63A Not tripping B 3In t≤0.1s Not tripping 1.13In t≤2h(In>63A) C 5In t≤0.1s B,C,D 1.45In t<1h(In≤63A) Tripping D 10In t≤0.1s 1.45In t<2h(In>63A) B 5In t<0.1s Tripping B,C,D 2.55In 1s<t<60s(In≤32A) Tripping C 0In t<0.1s 2.55In 1s<t<120s(In>32A) D 20In <0.1s ... -
YCB9-125 MCBGeneral 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. Curve Specifications Type Standart IEC60947-2 IEC/EN 60898-1 Electrical features Rated current In A 10,16,20,25,32,40,50,63,80,100,125 Poles P 1,2,3,4 Rated vol... -
YC6VA Voltage Protection RelayAppearance and Dimension of Keypad Description Voltage and current display relay is a microprocessor-based voltage monitoring device for single-phase AC networks to protect electrical equipment from surge voltage.The device analyzes the main voltage and displays its current value on a digital indicator. Load is switched by electromagnetic relay.The user can set the current voltage value and delay time through the butto... -
YCB9N-40 MCB DPNGeneral 1. Overload protection 2. Short circuit protection 3. Controlling 4. Used in residential building, non-residential building, energy source industry and infrastructure. 5. According to the type of instantaneous release classified as follows: type B(3-5)ln, type C(5-10)ln Release lype lest current Tripping time Expected result lype Test current Tripping time Expected resut... -
YCB9HL-63 RCBO ElectromagneticGeneral 1. Protection against overload and short-circuit currents. 2. Protection against the effects of sinusoidal alternating earth fault currents. 3. Protection against indirect contacts and additional protection against direct contacts. 4. Protection against fire hazard caused by insulation faults. 5. Used in residential building. 6. According to the type of instantaneous release classified as follows: type B(3-5)ln, ... -
YC9VA-3 Voltage Protection RelayDescription YC9VA voltage and current display relay is a microprocessor-based voltage monitoring device for single-phase AC networks to protect electrical equipment from surge voltage. The device analyzes the main voltage and displays its current value on a digital indicator. Load is switched by electromagnetic relay. The user can set the current voltage value and delay time through the button. The value is stored in non-volatile...
Copyright © 2022 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - Sitemap - AMP Mobile
3 Phase Starter, 250amp Mccb Circuit Breaker, 6a Elcb, 3p Ac Mcb, Mccb Microprocessor Based, Mpcb,
Hot Products - Sitemap - AMP Mobile
3 Phase Starter, 250amp Mccb Circuit Breaker, 6a Elcb, 3p Ac Mcb, Mccb Microprocessor Based, Mpcb,