Magnetic Starter
LE1 Magnetic Starter
LE1 Magnetic Starter
LE1 Magnetic Starter
LE1 Magnetic Starter
product introduction
Product Details


LE1 Magnetic starter is suitable for using in the circuits the rated voltage up to 690V AC SOHz or 60Hz.With AC 3 type,LE1 is used for starting or halting of three phase squirrel case electromotor which rated working voltage is 380V and rated working current is from 9A to 95A. Combining with matchable thermal relay can protect the motor from overload and phase failure.

Operation and installation condition

  1. Ambient air temperature: 5°C~+40°C, average temperature of 24 hours mustbelow +35°C

  2. Altitude:<2000m

  3. Relative humidity: The maximum temperature of 40 degrees,the air relativehumidity not exceed 50%,at a lower temperature can allow for a higher relativehumidity.The humidest month' s average lowest temperature must be below25℃, the max relative humidity of that month should not exceed 90%.lfhumidity changes as a result of occasional gel generated,should eliminate it.

  4. Pollution level: 3

  5. Installation category: Ill

  6. Installation position: The installation degree of the tilt and vertical plane shouldnot exceed ± 5°.

  7. Shock vibration:Products shouId be installed and used without severe shake,shock and vibration of the place.

Technical Parameters

PDF files
product inquiry

Your E-mail

Inquiry Content

Your Name

Telephone / Mobile phone

Verification code

Send Inquiry
Related products