Self healing low voltage shunt power capacitor was used in 50Hz and 60Hz powersystem, it mainly improver power factor, reduce reactive power loss, improve voltage quality, encavate transformer quantity and so on. It is best saving power products which company highly recommend and work.
This product meets the standards: GB/T 12747 2004, IEC60831 1996.
Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off, normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power control，it must install speediness discharge power equipment. it would not limited which use adopting same electric factor input and chip switch.
Altitude level is not more than 2000m.
Temperature type: low temperature -25℃, highest temperature is 50℃ (it would not more than 50℃, the average of temperature is not more than 40℃ within 24 hours, one year average of temperature is not more than 30℃), power capacitor will work within good ventilate condition. It would not permit within sealing and installation condition
Volume is small, weight is light easy installation: Metalized PPA thin film was adopt for medium, it only have 1/4 old products' volume and 1/5 old products' weight
Low loss little heating small change the temperatureNew type spray golden craftsmanship and special metalized edge thickness technology was adopted, it can strength the power capacitor anti surge capacity P「operty stability, working life will prolong, power capacitor itself power lost will reduce practice value is low than 0.08%, little heating small change the temperature and good saving power effect.
Excellence self healing property When medium parts was puncture, it can self heal quickly and recover normally work, improving the reliability.