• pro_banner

LE1 Magnetic Starter

Short Description:

General
LE1 Magnetic starter is suitable for using in the circuits the rated voltage up to 690V AC 50Hz or 60Hz.With AC-3 type,LE1 is used for starting or halting of three-phase squirrel case electromotor which rated working voltage is 380V and rated working current is from 9A to 95A. Combining with matchable thermal relay can protect the motor from overload and phase failure.


Product Detail

Product Tags

Operation and installation condition

1. Ambient air temperature:-5℃~+40℃, average temperature of 24 hours must below +35℃
2. Altitude:≤2000m
3. Relative humidity: The maximum temperature of 40 degrees,the air relative humidity not exceed 50%,at a lower temperature can allow for a higher relative humidity.The humidest month’s average lowest temperature must be below 25℃,  the max relative humidity of that month should not exceed 90%.If
humidity changes as a result of occasional gel generated,should eliminate it.
4. Pollution level: 3
5. Installation category: III
6. Installation position: The installation degree of the tilt and vertical plane should not exceed ±5°.
7. Shock vibration:Products should be installed and used without severe shake, shock and vibration of the place.

product-description1 product-description2


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • CJX2s-N Mechanical Interlocking Contactor

      CJX2s-N Mechanical Interlocking Contactor

      Specifications Outline and Installation Dimensions CJX2s-09~38N CJX2s-40~95N

    • IST230A Series Mini Vector Inverter

      IST230A Series Mini Vector Inverter

    • YCP5 Motor Starter

      YCP5 Motor Starter

      Operation and installation condition 1. Installation altitude≤2000m 2. Ambient air temperature -5℃ ~+40℃ average temperature of 24 hours must below +35℃ 3. Relative humidity below 90% when the temperature is +25℃±5℃ 4. Ambient pollution level: 3 5. Installation category of the starter: III Acting characteristic of each phase in distribution circuit breaker in the load balanced condition

    • CJX2i AC Contactor

      CJX2i AC Contactor

      Product Overview CJX2i series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long distance. It is used in combination with thermal relay to compose a magnetic motor starter. Standard: IEC 60947-1, IEC 60947-4-1. ...

    • CJ19i(CJ19s) Contactor

      CJ19i(CJ19s) Contactor

      Product Structure General CJ19i contactor for capacitor switching (hereinafter called contactor) is suitable for the circuit of AC 50Hz/60Hz with rated rated voltage up to 690V. It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacit...

    • CJX2-F AC Contactor

      CJX2-F AC Contactor

      General CJX2-F series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay. Standard: IEC 60947-4-1. Type Designation Operating Conditions 1. Ambient te...