Product Structure General CJ19i contactor for capacitor switching (hereinafter called contactor) is suitable for the circuit of AC 50Hz/60Hz with rated rated voltage up to 690V. It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacit...

Operation and installation condition 1. Ambient air temperature:-5℃~+40℃， average temperature of 24 hours must below +35℃ 2. Altitude:≤2000m 3. Relative humidity: The maximum temperature of 40 degrees,the air relative humidity not exceed 50%,at a lower temperature can allow for a higher relative humidity.The humidest month’s average lowest temperature must be below 25℃,  the max relative humidity of that month should not exceed 90%.If humidity changes as a result of...

General CJX2-K series AC Contactor is suitable for using in the circuits the rated voltage up to 660V AC 50Hz or 60Hz, rated current up to 12A in AC-3 using category , for making & breaking, frequently starting & controlling the AC motor. The contactor is produced according to IEC 60947-4. Type Designation ...

Application Fields 1. Applied with boiler drunm, induced draft fan, coal mine ventilator, etc 2. Applied in central air-condition energy saving optimization, air compressor energy saving renovation, music fountain, etc 3. Applied with water circulating pump, water supply pump, clear water pump, sewage pump, purification pump, constant pressure water supply, oilfield water injection pump, oil pump, etc 4. Applied with mine conveyer, coal feeder, mixer, pulverizer, con...

General CJX2-F series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay. Standard: IEC 60947-4-1. Type Designation Operating Conditions 1. Ambient te...