• pro_banner

DDS226 Electronic Single-phase Meter

Short Description:

General
The DDS226 type single-phase electronic watt-hour meter adopts exclusive using LSI, the device typifying new periphery component, simple structure, high reliability, low power consumption, long life etc, is suitable for the single-phase AC active electric energy with rated frequency of 50Hz.


Product Detail

Product Tags

Function and features

1. Measure active electric energy, no need of calibration for long-term operation;
2. Adopt dedication meter age chip ADE7755;
3. Adopt lasted electricity dedication integrated circuit including digital multiplier overseas, greatly improved dynamic working range of Meter, making 1 multiple actual overload;
4. Have a good mistake linearity at a range of 5%Ib~Imax;
5. Few periphery component, simple structure, low power consumption;
6. Adopt high reliability and long life electronic component, so the meters assume features of high reliability and long life.
*Way of display: LCD.
*Remote interruption of power supply function.

product-description1


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • DDS226D-1P M Din-rail Single-phase Meter

      DDS226D-1P M Din-rail Single-phase Meter

      Basic Function 1. LCD display with backlight; 2. Bi-directional total active energy, reverse active energy measure in the total active energy; 3. The meter also display real voltage, real current, real power, real power factor, real frequency, import active energy, export active energy; 4. Keypad for LCD display step by step 5. Reset energy function (the reset energy kWh display is dependent with the total energy display, this reset will not affect the total energy) ...

    • MSQ Current Transformer

      MSQ Current Transformer

    • YC-48 Panel Meter

      YC-48 Panel Meter

    • BGMJ Low Voltage Shunt Capacitor of The Self-healing Type

      BGMJ Low Voltage Shunt Capacitor of The Self-he...

      Working Conditions 1. Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off, normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power controller, it must install speediness discharge power equipment. it would not limited which use adopting same electric factor input and chip switch. 2. Altitude ...

    • DDS226D-2P WIFI Din-rail Single-phase Meter

      DDS226D-2P WIFI Din-rail Single-phase Meter

      Basic Function 1. LCD display,button for LCD display step by step 2. Bi-directional total active energy, reverse active energy measure in the total active energy 3. The meter also display real voltage, current, active power, reactive power,power factor,frequency 4. Timing and delay control by APP 5. History active energy consumption tracking by APP 6. Check the real current,voltage active power by APP 7. Remote control on/off by APP 8. WIFI communication, can read an...

    • DDS226-1 Single Phase Static Watt Hour Meter

      DDS226-1 Single Phase Static Watt Hour Meter

      Basic Function 1. Mechanical step register 5+1(default) , anti-reverse protection or LCD display 6+1 or 5+2; 2. Bi-directional total active energy measurement ,reverse active energy measure in the total active energy; 3. Pulse LED indicates working of meter, Pulse output with optical coupling isolation; 4. Reverse LED indicates the reverse current direction or wire reverse connect; 5. Two type of cases (protective-class I and II) are available. Optional Function Ultr...