• pro_banner

CJX2s-F AC Contactor

Short Description:

General

CJX2s series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay.

Standard: IEC 60947-4-1.


Product Detail

Product Tags

cjx2s-F-product-description1
cjx2s-F-product-description2

Type Designation

cjx2s-F-product-description3

Operating Conditions

1. Ambient temperature: -5℃~+40℃;
2. Air conditions: At mounting site, relative humidity not exceed 50% at the maximum temperature of +40℃. For the wettest month, the maximum relative humidity averaged shall be 90% while the lowest temperature averaged in that month is +20℃,special measures should be taken to occurrence of condensation.
3. Altitude: ≤2000m;
4. Pollution grade: 2
5. Mounting category: III;
6. Mounting conditions: inclination between the mounting plane and the vertical plane not exceed ±5º;
7. The product should locate in the places where there are no obvious impact and shake.

cjx2s-F-product-description4

Technical Data

Table 1

product-description1
product-description2

Structure Features

1. The contactor is composed of arc-extinguishing system, contact system, base frame and magnetic system (including iron core, coil).
2. The contact system of the contactor is of direct action type and double-breaking points allocation.
3. The lower base-frame of the contactor is made of shaped aluminum alloy and the coil is of plastic enclosed structure.
4. The coil is assembled with the amarture to be an integrated one. They can be directly taken out from or inserted into the contactor.
5. It is convenient for user's service and maintenance.

product-description3

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • CJ19 Changeover Capacitor AC Contactor

      CJ19 Changeover Capacitor AC Contactor

      General CJ19 series AC Contactor is suitable for using in the circuits the rated voltage up to 400V AC 50Hz or 60Hz.CJ19 is used to combine with low voltage reactive power compensators or cut off low voltage shunt capacitor. CJ19 series AC Contactor has restraining device to effectively decrease impact caused by inrush transient current when switch on or over voltage when switch off. ...

    • CJX2-F AC Contactor

      CJX2-F AC Contactor

      General CJX2-F series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay. Standard: IEC 60947-4-1. Type Designation Operating Conditions 1. Ambient te...

    • CJX2i AC Contactor

      CJX2i AC Contactor

      Product Overview CJX2i series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long distance. It is used in combination with thermal relay to compose a magnetic motor starter. Standard: IEC 60947-1, IEC 60947-4-1. ...

    • YCB2000 High-performance vector lnverter

      YCB2000 High-performance vector lnverter

    • YCQ7 Magnetic Starter

      YCQ7 Magnetic Starter

      Operation and Installation Condition Altitude:≤2000m Ambient air temperature:-5℃~+40℃, average temperature of 24 hours must below+35℃ Relative humidity: the maximum temperature of 40 degrees, the air relative humidity not exceed 50%, at a lower temperature can allow for a higher relative humidity. The wettest month’s average lowest temperature must be below 25℃, the max relative humidity of that month should not exceed 90%. If humidity changes as a result of occasi...

    • JR28s Thermal Relay

      JR28s Thermal Relay