• pro_banner

CJX2s AC Contactor

Short Description:


Product Detail

Product Tags

cjx2s-product-description1
cjx2s-product-description2
cjx2s-product-description3
cjx2s-product-description4

Product Overview

CJX2s series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long distance. It is used in combination with thermal relay to compose a magnetic motor starter.
Standard: IEC 60947-1, IEC 60947-4-1.

Specifications

Rated operation current(Ie): 9-95A;
Rated operation voltage(Ue): 220V~690V;
Rated insulation voltage: 690V; Poles: 3P;
Installation: Din rail and screw installation.

Operating and Installation Conditions

cjx2s-product-description5

Specifications

cjx2s-product-description6

Overall and Mounting

CJX2s-09~38

cjx2s-product-description7

CJX2s-40~95

cjx2s-product-description8
cjx2s-product-description9
F4-D, LA2-D, LA3-D Contact Block
LX1-D Coil
Derived Products When The Contactor is Assembled With Following Accessory Module
F4-D, LA2-D, LA3-D Contact Block

cjx2s-product-description10

LX1-D Coil

Derived Products When The Contactor is Assembled With Following Accessory Module


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • YCB2000 High-performance vector lnverter

      YCB2000 High-performance vector lnverter

    • YCQ7 Magnetic Starter

      YCQ7 Magnetic Starter

      Operation and Installation Condition Altitude:≤2000m Ambient air temperature:-5℃~+40℃, average temperature of 24 hours must below+35℃ Relative humidity: the maximum temperature of 40 degrees, the air relative humidity not exceed 50%, at a lower temperature can allow for a higher relative humidity. The wettest month’s average lowest temperature must be below 25℃, the max relative humidity of that month should not exceed 90%. If humidity changes as a result of occasi...

    • YCP5 Motor Starter

      YCP5 Motor Starter

      Operation and installation condition 1. Installation altitude≤2000m 2. Ambient air temperature -5℃ ~+40℃ average temperature of 24 hours must below +35℃ 3. Relative humidity below 90% when the temperature is +25℃±5℃ 4. Ambient pollution level: 3 5. Installation category of the starter: III Acting characteristic of each phase in distribution circuit breaker in the load balanced condition

    • CJX2-F-N Mechanical Interlocking Contactor

      CJX2-F-N Mechanical Interlocking Contactor

    • CJX2-F AC Contactor

      CJX2-F AC Contactor

      General CJX2-F series AC contactor is applied to circuits with AC 50Hz/60Hz, rated voltage up to 690V, rated current up to 800A. It is used for remote making & breaking circuits, and protect circuit from overload when assembling with thermal over-load relay. Standard: IEC 60947-4-1. Type Designation Operating Conditions 1. Ambient te...

    • CJX2-Z DC Contactors

      CJX2-Z DC Contactors

      CJX2-09~32Z Application CJX2-Z series DC operated contactor is suitable for use in the circuits up to rated voltage 660V DC 50Hz or 60Hz, and in rated current 9-95A in DC-3/380V load circuits. For remote controlling circuit making, breaking and frequent starting DC motors. It can also combine with the auxiliary contact g...