The dual power automatic switch is a newly developed miniature household power switch, which is mainly used to test whether the main power supply or standby power supply is normal. When the normal power supply is abnormal, the standby power supply starts to work immediately, which ensures the continuity, reliability, and safety of power supply. This product is specially designed for household rail installation and is specially used for PZ30 distribution box.
Product Overview
The dual power automatic switch is used to switch between two power sources. It is divided into common power supply and standby power supply. When the common power supply is powered off, the standby power supply is used. When the common power supply is called, the common power supply is restored), if you do not need automatic switching in special circumstances, you can also set it to manual switching (this type of manual / automatic dual-use, arbitrary adjustment).
YCQ6s Series Automatic Transfer Switch provides reliable automatic changeover between normal and standby power sources. With 16A–630A rated current, AC 400V operation, and PC-class design, it is suitable for power distribution, generator backup, and dual power supply applications.
YCQ6 Automatic Transfer Switch ATS is used for automatic or manual changeover between main and standby power sources in low-voltage distribution systems. It supports AC400V, 50/60Hz systems and covers rated current from 16A to 3200A.
It is suitable for utility-generator or main-standby power transfer in hospitals, banks, high-rise buildings, industrial facilities, and other critical power supply applications. The product supports automatic control, remote electric operation, emergency manual operation, and emergency disconnection, meeting the requirements of reliable and safe power transfer.
Standard: IEC 60947-6-1
General
YCQ9E series automatic transfer switch, rated working curent 16A to 630A,to be used in pow- er systems for ensuring the continuity of the supply, by transfering a load between two power supply sources. The switch has three working posions of “Main ( I ) cosing”, “Standby ( II )
closing” and “Double-of (0)”, which can be used for fire-fighting linkage and infrequent con-
necion and disconnecion of power supply systems. Mainly used in hospitals, shopping malls, banks, chemical industy, metalurgy, high-rise buildings, military facilities and fire-fighting occa- sions where power failure is not allowed.
Standards: IEC 60947-6-1
This series of Automatic transfer switch is suitable for AC 50Hz/60Hz, rated working voltage 230V/400V and below power distribution and control circuit.The current up to 63A. It is mainly used as the main switch of terminal electrical appliances, and can also be used to control various types of motors, low-power electrical appliances,lighting and other places.
Standard:IEC60947-6-1
General
ATS220 is one controller with YCQ4 ATS system of Mains and genset power,which can
control the YCQ4 ATS switch by auto or manual mode to apply for mains and gens power.It is with 4 digits LED tube which can display the single-phase gens voltage, gens frequency, mains voltage, mains frequency. YCQ4 ATS switch working status can be also shown by
LED.
All the parameters can be set through the front face buttons or PC port.